Journal of Advanced Sciences and Engineering Technologies
HOME AIMS AND SCOPE INSTRUCTIONS FOR AUTHORS EDITORIAL BOARD ARCHIVE INDEXING CONFERENCES DOWNLOAD ETHICS & POLICIES FAQ CONTACT US
Contact
Published By : ISNRA (International Scholars and Researchers Association)
(ISNRA) EMAIL: info@isnra.com © 2018 ISNRA.All Rights Reserved.
Principal Contact
Prof. Dr. Takialddin Al Smadi
Email: dsmaditakialddin@gmail.com
Support Contact
Prof. Dr. Aziz I. Abdulla
Email:lan914@gmail.com
Focus and Scope
Journal of advanced Sciences and Engineering Technologies (JASET), a peer-reviewed quarterly journal, publishes both theoretical and experimental high quality papers of permanent interest, not previously published in journals, in the field of engineering and applied science which aims to promote the theory and practice of technology and engineering. In addition to peer-reviewed original research papers, the Editorial Board welcomes original research reports, state-of-the-art reviews and communications in the broadly defined field of engineering science and technology.
The JASET is not limited to a specific aspect of science and engineering but is instead devoted to a wide range of subfields in the engineering sciences. While it encourages a broad spectrum of contribution in the engineering sciences, its core interest lies in issues concerning material modeling and response. Articles of interdisciplinary nature are particularly welcome.
The primary goal of the new editors is to maintain a high quality of publications. There will be a commitment to expediting the time taken for the publication of the papers. To enhancing the objectivity and fairness of the review process, the article authors’ names will be deleted.
The publication of an article in a peer-reviewed journal is an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of the work of the authors and the institutions that support them. Peer-reviewed articles support and embody the scientific method.
The Journal accepts types of paper
Contributions falling into the following categories will be considered for publication:
-Original Research Papers
-Original Research Reports
-State-of-the-art Reviews
-Short Communications / Technical notes
-Letters to the editor
The Editors reserve the right to reject papers without sending them out for review.
Section Policies
Editor-in-Chief
Member IEEE .Communication & Electronics Department, Faculty of Engineering, Jerash University, Jordan, ResearcherID: W-1977-2017 ,
Email: proftaki@isnra.com, dsmaditakialddin@gmail.com, Tel: 00962777244483
Assistant Editor-in-Chief
Prof. Dr. Aziz I. Abdulla, Civil Eng. Dept/College of Eng./ Tikrit University, Iraq,
Scopus ID: 55961503800:
Prof. Dr. Fayadh Mohamed Abed, Mechanica Eng. Dept/College of Eng./ Dean College Of Engineering,Tikrit University,Iraq ,Scopus ID: 44460960100,
Prof.Dr. Ayman Al Sawalha,(TheoreticalPhysics) Dean,Faculty of Science , Jerash university, Jordan, Scopus ID:24921435000
Managing Editor
Asst. Prof. Dr. Asmaa Hatem Rashid , Computer Science & Information Technology, KSA,Unversity of Malaya (UM) Scopus ID: 55671858700
http://www.researcherid.com/rid/J-1569-2012
Prof. Dr. Jarrar M Bashir, Histology, Histocytotechnology and Electron Microscopy,Department of Biological Sciences,Faculty of Science , Jerash university, Jordan, Scopus ID: 6603293721
Publication Frequency
Journal of advanced Sciences and Engineering Technologies (JASET), was originally published as in 2018 with a 4 issue per year.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public which supports a greater global exchange of knowledge.
Abstracting and Indexing
The journal’s researches indexed at the following sites:
Cross Ref.
DOI
Research Gate
J-Gate
EBSCOhost
Academia.edu (USA)
Citefactor
Plagiarism
The JASET journal adheres intolerably to the highest practices and professional standards of publication ethics. Papers submitted to JASET are screened for plagiarism using Similarity Check / TurnitIN plagiarism detection program. In addition to original research articles, publishes insightful review and tutorial papersTo find out more about CrossCheck visit https://www.crossref.org/crosscheck.html
Submissions
Online Submissions Already have a Username/Password for JASET? GO TO LOGIN Need a Username/Password? GO TO REGISTRATION Registration and login are required to Submit Article online and to check the status of current submissions. Submission Preparation Checklist As part of the submission process, authors are required to check off their submission’s compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
- The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
- The submission file is in Open Office, Microsoft Word, RTF, or Word Perfect document file format.
- Where available, URLs for the references have been provided. Preferred to use EndNote program
- The text is double-spaced; uses a 12-point font A4 papers; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
- The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
- If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.
Author Fees
JASET journal charges the following author fees:
Article Submission: 150.00 (USD) Authors are required to pay article submission fees as part of the submission process to contribute to review costs. The author can pay half of the fees when submitting the manuscript and the other half after the final acceptance.
ISSN(s): 2617-2070
Editorial Team
EDITOR-IN-CHIEF :
![]() |
Prof. Dr. Takialddin Al Smadi, Jerash University, Jordan, ResearcherID: W-1977-2017 , Scopus ID: 37080124500 , Email: dsmaditakialddin@gmail.com View Full CV |
Associate Editors :
![]() |
Prof. Dr. Aziz Ibrahim Abdullah, Iraq ,Scopus ID: 55961503800,Email: aziz@tj-es.com View Full CV |
![]() ![]() |
Prof.Dr. Ayman Al Sawalha,(TheoreticalPhysics) Dean,Faculty of Science , Jerash university, Jordan, Email : draymansawalha@gmail.com , Scopus ID:24921435000 View Full CV |
![]() |
Prof. Dr. Fayadh Mohamed Abed, Iraq E-mail: fayadh_mohamed@tu.edu.iq, |
![]() |
Prof. Dr. Waleed M. Sh. Alabdraba, Environmental Engineering,Department,Tikrit University ,Iraq, E-mail: walabdraba@tu.edu.iq, Scopus ID: 57190943672 |
Managing Editor :
![]() ![]() |
Associate. Prof. Dr. Mousa Ibraheem Bani Baker,Department of Civil and infrastructure Engineering/ Faculty of Engineering and Technology, Candidate member of Professional Engineers of Ontario (Toronto, Canada). |
_____________________________________________________________
Editorial Board
Prof. Dr.Yahya S Khraisat
Electrical and Electronics , Al – Huson University College/ Al – Balqa’ Applied University,Scopus ID:35612482700
Professor of Nanoscience and Nanotechnology Nanotechnology and Catalysis Research Center (NANOCAT), University of Malaya, 50603 Kuala Lumpur Malaysia. Scopus ID:6701757524
Prof. Dr. Jarrar M Bashir
Histology, Histocytotechnology and Electron Microscopy,Department of Biological Sciences,Faculty of Science , Jerash university, Jordan,Scopus ID: 6603293721
Associate.Prof.Tharwat al Hawamdeh
faculty of Economics and Administrative Sciences. jerash University
Assistant Professor Dr. Khalaf Salloum Gaeid Alshammery
Control System ,Faculty of Engineering, Electrical Engineering Department ,Tikrit University,iraq
Assistant Professor Dr. Khalaf Salloum Gaeid Alshammery
Control System ,Faculty of Engineering, Electrical Engineering Department ,Tikrit University,iraq
Associate. Professor.Dr.Yasir Khalil Ibrahim
Electrical & Computer Engineering, Valencia, Spain,, Mazaya University College/Department of Computer Technology,Nasiriya,Iraq,Scopus ID: 15064247000
Asst. Prof. Dr. Asmaa Hatem Rashid
Computer Science & Information Technology, KSA,Unversity of Malaya (UM) Scopus ID: 55671858700
Asst. Prof.Dr. Alyaa Abbas Al-Attar
Civil Eng. Dept/College of Eng./Technical College of Kirkuk,Head of Scientific Service Consulting Bureau in Northen Technical University,Iraq, Scopus ID :55940223500,Thomson Reuters Research ID: F-2466-2018
Wessal M. Khamis.
Physical Chemistry, Mustansiryah University/College of Science/Chemistry Department, Iraq
Assist. Prof. Dr. Farouk Majeed Muhauwiss
Geotechnical Engineering Civil Engineering Department ,College of Engineering ,Tikrit University,iraq
Assist. Prof. Dr. Assim Mohammed Lateef
Structural Engineering,Civil Engineering , Department,Tikrit University,iraq
Journal Secretary
Shalala Suleymanzade,Turkey,Istanbul universityE-Mail : shalala.suleymanzada@mail.ru |
![]() |
Journal of Advanced Sciences and Engineering Technologies (JASET) (J. Adv. Sci. Eng. Technol.)
ISSN:2617-2070
© Copyright 2019 JASET, International Scholars and Researchers Association
available online at https://www.jaset.isnra.org DOI: https://doi.org/10.32441/jaset
Author Guidelines
ISSN:2617-2070
Submissions Online Submissions
Submit Article.
Authors are requested to follow(JASET) guidelines for preparing their manuscripts JASET-Template
- Submission Preparation Checklist As part of the submission process, authors are required to check off their submission’s compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
- The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
- The submission file is in Open Office, Microsoft Word, RTF, or Word Perfect document file format.
- Where available, URLs for the references have been provided. Preferred to use EndNote program
- The text is double-spaced; uses a 12-point font A4 papers; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
- The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
- If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.
ISSN:2617-2070
After the article passes the plagiarism checking stage, and editor or editor section check, each manuscript will be reviewed by at least three independent referees who are within the subject area.
Peer review is a critical element of scholarly publication, and one of the major cornerstones of the scientific process. Peer Review serves two key functions:
1-Acts as a filter: Ensures research is properly verified before being published
2-Improves the quality of the research: rigorous review by other experts helps to hone key points and correct inadvertent errors
+Peer Review Process
ISSN:2617-2070
- Abstracting and Indexing
Cross Ref
DOI
J-Gate
EBSCOhost
UlrichsWeb
ICI Journals Master List database
![]() |
![]() ![]() |
![]() ![]() |
![]() |
![]() ![]() ![]() ![]() |
Publication Ethics
The publication of an article in a peer-reviewed journal is an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of the work of the authors and the institutions that support them. Peer-reviewed articles support and embody the scientific method.
It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, the publisher and the society of society-owned or sponsored journals.
Publisher’s Responsibilities
We follow the Committee on Publication Ethics(COPE)’s Code of Conduct for Journal Publishers ( PDF ). The publisher is dedicated to supporting the vast efforts of the editors, the academic contributions of authors, and the respected volunteer work undertaken by reviewers. The publisher is also responsible for ensuring that the publication system works smoothly, and that ethical guidelines are applied to assist the editor, author, and reviewer in performing their ethical duties.
Editor’s Responsibilities
We follow the Committee on Publication Ethics (COPE)’s Code of Conduct and Best Practice Guidelines for Journal Editors ( PDF ). In addition, some key points are listed below. The editor should acknowledge receipt of submitted manuscripts within two working days of receipt and ensure an efficient, fair, and timely review process. The editor should ensure that submitted manuscripts are processed in a confidential manner, and that no content of the manuscripts will be disclosed to anyone other than the corresponding author, reviewers, and the publisher, as appropriate.The editor should recuse himself or herself from processing manuscripts if he or she has any conflict of interest with any of the authors or institutions related to the manuscripts. The editor should not disclose the names and other details of the reviewers to a third party without the permission of the reviewers. The editor has the right to make the final decision on whether to accept or reject a manuscript with reference to the significance, originality, and clarity of the manuscript and its relevance to the journal. The editor should by no means make any effort to oblige the authors to cite his or her journal either as an implied or explicit condition of accepting their manuscripts for publication. The editor should not use for his or her own research any part of any data or work reported in submitted and as yet unpublished articles. The editor should respond promptly and take reasonable measures when an ethical complaint occurs concerning a submitted manuscript or a published paper, and the editor should immediately contact and consult with the author. In this case, a written formal retraction or correction may also be required.
Reviewer’s Responsibilities
We follow the Committee on Publication Ethics (COPE)’s COPE Ethical Guidelines for Peer Reviewers ( PDF). In addition, some key points are listed below. The reviewer who feels unqualified to review the assigned manuscript or affirms that he or she cannot meet the deadline for completion of the review should immediately notify the editor and excuse himself or herself from the process of reviewing this manuscript. The reviewer should inform the editor and recuse himself or herself from reviewing the manuscript if there is a conflict of interest. Specifically, the reviewer should recuse himself or herself from reviewing any manuscript authored or coauthored by a person with whom the reviewer has an obvious personal or academic relationship, if the relationship could introduce bias or the reasonable perception of bias. The reviewer should treat the manuscript in a confidential manner. The manuscript should not be disclosed to or discussed with others except as authorized by the editor. The reviewer should approach the peer-review job objectively. Personal criticism of the author is unacceptable. The reviewer should not use for his or her own research any part of any data or work reported in submitted and as yet unpublished articles. The reviewer should immediately notify the editor of any similarities between the manuscript under review and another paper either published or under consideration by another journal. The reviewer should immediately call to the editor’s attention a manuscript containing plagiarized material or falsified data.
Author’s Responsibilities
The author should not submit concurrent manuscripts (or manuscripts essentially describing the same subject matter) to multiple journals. Likewise, an author should not submit any paper previously published anywhere to the journals for consideration. The publication of articles on specific subject matter, such as clinical guidelines and translations, in more than one journal is acceptable if certain conditions are met. The author should present a precise and brief report of his or her research and an impartial description of its significance. The author should honestly gather and interpret his or her research data. Publishers, editors, reviewers, and readers are entitled to request the author to provide the raw data for his or her research for convenience of editorial review and public access. If practicable, the author should retain such data for any possible use after publication. The author should guarantee that the works he or she has submitted are original. If the author has used work and/or words by others, appropriate citations are required. Plagiarism in all its forms constitutes unethical publishing behavior and is unacceptable.
The author should indicate explicitly all sources that have supported the research and also declare any conflict(s) of interest. The author should give due acknowledgement to all of those who have made contributions to the research. Those who have contributed significantly to the research should be listed as coauthors. The author should ensure that all coauthors have affirmed the final version of the paper and have agreed on its final publication. The author should promptly inform the journal editor of any obvious error(s) in his or her published paper and cooperate earnestly with the editor in retraction or correction of the paper. If the editor is notified by any party other than the author that the published paper contains an obvious error, the author should write a retraction or make the correction based on the medium of publication.
Open Access Policy
JASET(J. Adv. Sci. Eng. Technol.) journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
Copyright and open access licenses : Authors retain copyright in their article and have a choice of Creative Commons licenses (http://creativecommons.org/licenses/by/4.0/).
Attribution 4.0 International (CC BY 4.0)
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.

Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
- You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.
- No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.